Bosch INDEGO 400 Lawn Mower Manual

The Bosch INDEGO 400 is an innovative robotic lawn mower designed for efficient and precise grass cutting. With its intelligent navigation system, it can easily maneuver around obstacles and cover areas up to 400 square meters. The mower features a weatherproof design, allowing it to operate in various weather conditions, and it is equipped with a powerful battery that provides up to 50 minutes of mowing time on a single charge. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, weatherproof design, intelligent navigation, and user-friendly interface.

FeatureDescription
Intelligent NavigationEfficiently maps and navigates the mowing area.
Weatherproof DesignOperates in various weather conditions.
Battery PoweredUp to 50 minutes of mowing on a single charge.
Obstacle DetectionAutomatically avoids obstacles in its path.
Remote ControlControl the mower via a smartphone app.

Installation

Unpack and inspect contents. Set up the charging station in a suitable location.

  1. Choose a flat area for the charging station.
  2. Connect the charging station to a power outlet.
  3. Set up boundary wires to define the mowing area.
  4. Ensure the mower is charged before first use.

WARNING! Ensure the area is clear of obstacles before installation.

First-Time Setup

Power on the mower and follow the on-screen prompts.

  1. Set the desired mowing schedule using the app.
  2. Adjust cutting height according to your lawn type.
  3. Test the mower in a small area to ensure proper operation.

CAUTION! Keep children and pets away during setup.

Specifications

Controls and Settings

Access settings via the user-friendly interface on the mower or through the smartphone app.

Remote: Start, stop, and schedule mowing sessions remotely.

Settings: Adjust cutting height, mowing schedule, and battery status.

Connecting Devices

Connect the mower to your smartphone via Bluetooth for remote control.

  1. Download the Bosch INDEGO app from the app store.
  2. Follow the app instructions to connect to the mower.
  3. Ensure Bluetooth is enabled on your smartphone.

Tip: Keep the app updated for optimal performance.

Operating the Mower

To start mowing, ensure the mower is charged and the boundary wires are set.

  1. Press the start button on the mower or use the app.
  2. Monitor the mower's progress via the app.
  3. Return the mower to the charging station when finished.

WARNING! Do not attempt to override safety features.

Maintenance

Regular maintenance is essential for optimal performance.

  1. Clean the blades after each use.
  2. Check battery status regularly.
  3. Inspect boundary wires for damage.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower does not startBattery lowCharge the battery fully.
Uneven cuttingBlades dullSharpen or replace blades.
Boundary wire issuesWire damagedInspect and repair boundary wire.
Mower stops unexpectedlyObstacle detectedClear the area of obstacles.

Reset: Refer to the app for reset instructions if needed.

Service: Contact Bosch support for assistance.

Bosch INDEGO 400 Lawn Mower Manual © - All Rights Reserved 2026