Bosch Indego 1000 Connect Lawn Mower Manual

The Bosch Indego 1000 Connect is an innovative robotic lawn mower designed for efficient and autonomous lawn care. With its smart navigation system, it can map your garden and mow in straight lines, ensuring an even cut. The mower is equipped with a weather sensor, allowing it to return to its charging station during rain. It features a user-friendly app for remote control and scheduling, making lawn maintenance easier than ever. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Mowing Operation 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Smart navigation system, weather sensor, user-friendly app, charging station, adjustable cutting height.

Feature	Description
Smart Navigation	Maps the garden for efficient mowing
Weather Sensor	Returns to charging station during rain
User App	Remote control and scheduling
Adjustable Cutting Height	Customizable grass length
Charging Station	Automatically returns for recharging
Safety Features	Lift and tilt sensors for safe operation

Installation

Unpack and inspect contents. Place the charging station in a suitable location.

Set up the charging station: Ensure it is on a flat surface and within reach of a power outlet.
Install boundary wire: Outline the area to be mowed, ensuring no obstacles are within.
Connect the mower to the charging station.
Download the app and connect to the mower.

WARNING! Ensure the area is clear of debris before operation.

First-Time Setup

Power on the mower; follow the app prompts for initial setup.

Connect to Wi-Fi: Follow the app instructions to connect the mower to your home network.
Set mowing schedule: Use the app to set preferred mowing times.
Adjust cutting height: Set the desired height for your lawn.
Test mow: Perform a test run to ensure proper operation.

CAUTION! Ensure the boundary wire is properly installed before mowing.

Specifications

Cutting Width: 26 cm.
Max Area: Up to 1000 m².
Battery: Lithium-ion, 18V.
Charging Time: Approximately 60 minutes.
Weight: 7.5 kg.
Noise Level: 60 dB.
Operating Temperature: 0°C to 50°C.

Controls and Settings

Access settings via the user app. Manual controls are located on the mower for immediate operation.

App Features: Schedule mowing, adjust settings, check battery status, and receive notifications.

Connecting Devices

Connect the mower to your home Wi-Fi network using the app for remote control.

Ensure the mower is powered on and within range of your Wi-Fi.
Follow the app instructions to complete the connection.
Test the connection by sending a command from the app.

Tip: Keep the app updated for optimal performance.

Mowing Operation

The mower operates autonomously based on the set schedule.

Start mowing: The mower will begin at the scheduled time.
Return to charging: Automatically returns when battery is low or when it starts to rain.
Adjust settings as needed via the app.

WARNING! Do not attempt to lift the mower while it is operating.

Accessibility Features

The app provides voice commands and notifications for users with accessibility needs.

Care & Cleaning

Unplug the mower before cleaning. Use a dry cloth to wipe down the exterior.

CAUTION! Avoid using water or cleaning agents on the mower.

Regulatory Information

This device complies with FCC Part 15. For support, visit www.bosch.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the mower and try again.
No connection to app	Wi-Fi issues	Check Wi-Fi connection and restart the app.
Mower not following boundary	Boundary wire issues	Check the installation of the boundary wire.
Uneven cutting	Dirty blades	Clean the blades and check for obstructions.

Reset: Use the app to reset settings if necessary.

Service: For assistance, contact Bosch support.