Bosch Indego 1200 Connect Lawn Mower Manual

The Bosch Indego 1200 Connect is a robotic lawn mower designed for efficient and autonomous lawn care. It features smart navigation technology, allowing it to map and mow your lawn systematically. With a cutting width of 26 cm and the ability to handle lawns up to 1200 m², it ensures a neat and tidy finish. The mower is equipped with a weather sensor, allowing it to return to its charging station during rain. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Smart navigation, weather sensor, mobile app connectivity, and efficient cutting system.

FeatureDescription
Smart NavigationMaps your lawn for efficient mowing patterns
Weather SensorAutomatically returns to charging station during rain
Mobile AppControl and monitor your mower remotely
Cutting Width26 cm for efficient mowing
Battery LifeUp to 60 minutes of mowing on a single charge
Charging TimeApproximately 60 minutes

Installation

Unpack and inspect contents. Place the charging station in a suitable location.

  1. Set up the charging station: Ensure it is on a flat surface and within reach of a power outlet.
  2. Install boundary wire: Outline the area to be mowed, ensuring no obstacles are within.
  3. Connect the mower to the charging station.

WARNING! Ensure the area is clear of debris before installation.

First-Time Setup

Power on the mower; follow the mobile app prompts for setup.

  1. Connect to Wi-Fi: Follow the app instructions to connect the mower to your home network.
  2. Set mowing schedule: Use the app to program the days and times for mowing.
  3. Adjust cutting height: Set the desired cutting height using the app or mower controls.

CAUTION! Ensure the boundary wire is properly installed before first use.

Specifications

Controls and Settings

Access settings via the mobile app or the control panel on the mower.

Control Panel: Power button, manual mowing mode, and cutting height adjustment.

Settings: Schedule mowing times, adjust cutting height, and monitor battery status through the app.

Connecting Devices

Connect the mower to your home Wi-Fi network for remote control via the app.

  1. Ensure the mower is powered on and within range of your Wi-Fi router.
  2. Follow the app instructions to connect the mower to your network.

Tip: Keep the app updated for optimal performance.

Operating the Mower

To start mowing, ensure the boundary wire is set and the mower is charged.

  1. Press the power button to turn on the mower.
  2. Use the app to start the mowing schedule or press the manual mode button.
  3. Monitor the mowing progress through the app.

WARNING! Do not attempt to lift or move the mower while it is operating.

Maintenance

Regular maintenance ensures optimal performance of your mower.

  1. Clean the mower blades after each use.
  2. Check the boundary wire for damage regularly.
  3. Store the mower in a dry place when not in use.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Keep children and pets away from the mowing area.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower does not startBattery lowCharge the mower.
Uneven cuttingBlades dullSharpen or replace blades.
Boundary wire issuesWire damagedInspect and repair boundary wire.
Mower stuckObstacles in the wayRemove obstacles and restart.

Reset: Refer to the app for reset instructions if needed.

Service: For support, contact Bosch customer service.

Bosch Indego 1200 Connect Lawn Mower Manual © - All Rights Reserved 2026