Bosch Rotak 43 LI-2 Ergoflex Lawn Mower Manual

The Bosch Rotak 43 LI-2 Ergoflex is a powerful cordless lawn mower designed for efficient grass cutting. It features a 43 cm cutting width, a lightweight design, and an ergonomic handle for comfortable operation. The mower is powered by a lithium-ion battery, providing excellent performance and runtime. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Ergoflex handle, lithium-ion battery, 43 cm cutting width, grass box, adjustable cutting height.

FeatureDescription
Ergoflex handleAdjustable handle for comfortable mowing position
Battery powerLong-lasting lithium-ion battery for cordless operation
Cutting width43 cm for efficient grass cutting
Grass boxLarge capacity for collecting grass clippings
Cutting height adjustmentMultiple settings for different grass lengths

Installation

Unpack the mower and ensure all parts are included. Assemble the handle and attach the grass box.

  1. Attach the handle: Align and secure the handle to the main body.
  2. Install the battery: Ensure the battery is charged and properly inserted.
  3. Check safety features: Ensure all safety guards are in place.

WARNING! Always read the manual before use to ensure safe operation.

First-Time Setup

Charge the battery fully before first use. Follow the instructions for adjusting the cutting height.

  1. Charge the battery: Connect to the charger and wait until fully charged.
  2. Adjust cutting height: Use the lever to set the desired height.
  3. Perform a test run: Start the mower and check for proper operation.

CAUTION! Ensure the area is clear of obstacles before mowing.

Specifications

Controls and Settings

Access controls via the handle: Start/Stop button, height adjustment lever.

Battery Indicator: LED indicator shows battery status during operation.

For optimal performance, regularly check and maintain the mower's components.

Connecting Devices

Ensure the battery is charged before connecting any accessories.

  1. Turn off the mower before connecting any devices.
  2. Follow the manufacturer's instructions for any additional attachments.

Tip: Always use Bosch-approved accessories for best performance.

Operating the Mower

To start mowing, ensure the area is clear and the mower is properly set up.

  1. Start the mower: Press the Start button on the handle.
  2. Mow the lawn: Move the mower in straight lines for even cutting.
  3. Stop the mower: Release the Start button to stop the motor.

WARNING! Keep hands and feet away from the cutting blade.

Maintenance

Regular maintenance is essential for optimal performance and longevity.

  1. Clean the mower after each use: Remove grass clippings and debris.
  2. Check the blade: Ensure it is sharp and free from damage.
  3. Store the mower in a dry place: Protect from moisture and extreme temperatures.

Safety Information

Always wear appropriate safety gear while operating the mower. Keep children and pets away from the mowing area.

CAUTION! Do not operate the mower in wet conditions.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower won't startBattery lowCharge the battery fully before use.
Uneven cuttingBlade dullSharpen or replace the blade as needed.
Grass clippings not collectedGrass box fullEmpty the grass box and continue mowing.
Excessive vibrationLoose partsCheck and tighten all screws and bolts.

Reset: If issues persist, refer to the service center.

Service: Contact Bosch support for assistance.

Bosch Rotak 43 LI-2 Ergoflex Lawn Mower Manual © - All Rights Reserved 2026